HM-220 Hot Jacket Stripper

HM-220 Hot Jacket Stripper

HM-220 Hot Jacket Stripper, for thermal stripping in a variety of fixtures, such as single-core, 4 core, 8 cores, 12 cores and thermal connector fixture

• IntroductionFiber thermal stripping pliers design small, lightweight, easy to use and reliable, longitudinal peel, peel force is small, the high quality of stripped fiber; blade durable and easy to replace, using linear bearing guide and thermal stripping to ensure no damage to the fiber, easy to strip coating, stripping speed and other characteristics.With the fixture using the strip 1-24 core optical fiber• ParametersCoating stripped length up to 30mmHeating mode, the lid has been heating heatingBlade life of more than one million timesTemperature setting in this machine has a 70 ° C, 80 ° C, 90 ° C, the fourth gear temperature of 100 °C.Power supply to use adapters convert DC12V power supply (can be connected to the welding machine)Dimensions 118.5 (L) X 46 (D) X 31.5 (H) mmTotal 300gEnvironmental requirements humidity less than 85%Material Aluminum• Scope of applicationStrip of ribbon fiber coating can be stripped of the 1-24 core optical fiber. Generally applicable to optical engineering, optical fiber ribbon cable docking, PLC splitter, FA.• method of operation1, both ends of the power adapter connected to AC220V power and thermal stripping power supply interface;2, the optical fiber according to user needs stripping the fiber length into the fixture3, to be installed fixture into the fixture of the good fiber mat4, open hot stripping power supply, press the power button for about one second until the power indicator light;5 temperature transferred to the 2 or 3rd gear;6, hot stripping pressure fiber cover to cover in turn covered and left;7, waiting for the heat indicator reaches the preset temperature indicator turns green;Stripping fiber: hand hold down the right part of the uniform, the left hand force pull to the left part;Special note: need to do the window stripping the left part of the clamp can not be opened in place, should stay at 3-5mm coating and optical fiber connected to.9, left cover, followed by open pressure-fiber cover, remove the fixture with a fiber, please note that each peel after do not forget to remove the coating peeling; 10, with a purity of more than 99 percent of the alcohol-soaked gauze clean the fiber direction of the arrow11, with a finger flick fiber top, so that the fiber does not overlap neatly arranged12, hold down the power button 4-5 seconds after the release, the power LED is off, turn off the power, unplug the power adapter.used the gauze please do not re-use; Please note that the fiber top stabbed a finger.

Note: The hot stripping pliers power when not using the unit more than five minutes to close, and unplug the power cord to avoid a long time in the heated state of the empty machine, reducing the life of the short hot stripping pliers.

HM-220 Hot Jacket Stripper