XT-X62W type universal milling machine electric skill training evaluation device(for students learning)Electronic production DIY

XT-X62W type universal milling machine for students learning Electronic production DIY electric skill training evaluatio

"XT-X62W type universal milling machine electric skill training evaluation device" is in the original "XT-X62W type universal milling machine electric skill training evaluation device" is conducted on the basis of the transformation and upgrade, it increases the X62W type universal milling machine model, and the hardware-in-the-loop simulation of the machine tools and machine tools and the electric parts of mechanical parts of organic linked together. Because of the movement of the machine tools all show come out, so that the teaching more vivid. This device for repair electrical (electrical) first, medium, advanced skill appraisal in the electrical parts of the machine tool training examination.

1. The function and characteristics

1. X62W type universal milling machine hardware-in-the-loop simulation model is according to the actual X62W type everything the size of the milling machine according to a certain proportion of the narrow design;

2. This device electrical part of the operation, can achieve everything X62W type milling machine all kinds of sports, and it includes: spindle positive &negative, desk, table in the vertical feed and cooling pump operation, the limit position limit protection;

3. The electrical wiring all the contact of the machine tool, of the device on the panel have corresponding test points, facilitating student detection fault;

4. Half a physical model used in the motor of the voltage grade and the actual machine tool is exactly the same;

5. The hardware-in-the-loop machine lathe bed with cast, special die once moldings, ball screw drive, the hand wheel using practical machine components, close to the real machine tools;

6. The hardware-in-the-loop machine tool parts adopt different color, training students more easy to understand, accept

7. The hardware-in-the-loop machine activity guide surface with high frequency quenching process, durable:

8. Control panel fault in which there are 32 switches, through the strike can be set up corresponding fault switch fault point.

2. Technical performance

1. The input power: the three-phase four-wire (380 V and 10% 50 Hz ac)

2. The work environment: temperature-10 degree C~+ 40 degree C, relative humidity < 85% (25 degree C), altitude 4000 m

3. Device capacity:<0. 2 kVA

4. Leakage protection movement current: ≤30 mA; Leakage protection movement time: ≤0.1 s

5. Control screen size: 1410 mm * 725 mm * 1535 mm

6. Half a physical model table size: 1268 mm * 723 mm * 798 mm

7. X62W universal milling machine model size: 900 mm * 300 mm * 370 mm

8. The trip: 130 mm longitudinal mobile

9. The trip: 30 mm vertical movement

10. The lateral movement trip: 50 mm

3. Equipment configuration

Serial number	name	number	note
1	XT-X62W type universal milling machine electric skill training evaluation device	1
2	X62W universal milling machine and a half (including training physical model table)	1	Equipped with and electrical connection interface, the cable connection

4. Training project and purpose

1. Get familiar with low-voltage institutions, principle

2. Through the observation of the model, understand the machine movement of the machine tool actual sports

3. To understand the principle of electric control machine tools and various protection device

4. Master of machine tool common faults elimination method

  

XT-X62W type universal milling machine electric skill training evaluation device(for students learning)Electronic production DIY