HMWST-C2 type intelligent temperature controller

intelligent temperature controller manual switch socket

WST-C2 type intelligent temperature controller introduction

The function of each button is clearly, through the relay hige to achieve automatic control, temperature controller will according to the changes and automatically shut off or start the control equipment.

1. Technical specifications:

Temperature measurement range:	0-125degree
Sensor:	DS18B20
Resolution:	0.1degree
The control accuracy:	0.1 degree
Output type:	relay (contacts capacity of 250 V, 5A),
Shell size:	87 mm *135 mm *45 mm
Working voltage:	AC85 ~ 242 V  50 Hz / 60 Hz
Types of control:	Heating-type	Cold-type	Automatic heating/cold type

2. The parameters set operation:

Shows an energized observation, not changing the set, the original record the data set with automatic control operationChange is accused of temperature setting: It is energized, long press SET key, access to menu mode, according to the corresponding parameters on the adjustment, press " increase " or " reduce " button to change the SET value, " increase " is used to increase the temperature setting, " reduce " used to reduce the temperature setting, Press the "SET" save Settings of data, then the temperature controller to return to control operation. In more than 15 seconds set state not operation will automatically save Settings data and returns status.Of actual use please do not set the limit higher than the upper.Temperature sensor short-circuit, open circuit fault tip Err.

3. Installation: instrument temperature must be held at around -5degree ~ 65degree, the instrument must be placed in no damp and high pressure situation, and ventilation to easy to heat dissipation. 

4. Wiring: put the device that need to control inserted in a socket, the power supply must match the manual of the instrument.

5. Parameter:

symbols		Description	range	Default value
H1		The first group High limit	0-124.9degree	26degree
L1		The first group Low limit		25degree
H2		The second group High limit		32degree
L2		The second group Low limit		30degree
HH	Need to customize	High alarm limit	1-124.9degree	95degree
LL		Low alarm limit	0-124.9degree	10degree
HC1		Group 1 Cooling/heating switches	00~70	00
HC2		Group 2 Cooling/heating switches	00~70	01

Note: HC heating/cooling state switch data

00 = heating,01= cooling  Other values are not output

HMWST-C2 type intelligent temperature controller